CSAKM
Computes the Akima cubic spline interpolant.
Required Arguments
XDATA — Array of length NDATA containing the data point abscissas. (Input)
The data point abscissas must be distinct.
FDATA — Array of length NDATA containing the data point ordinates. (Input)
BREAK — Array of length NDATA containing the breakpoints for the piecewise cubic representation. (Output)
CSCOEF — Matrix of size 4 by NDATA containing the local coefficients of the cubic pieces. (Output)
Optional Arguments
NDATA — Number of data points. (Input)
Default: NDATA = size (XDATA,1).
FORTRAN 90 Interface
Generic: CALL CSAKM (XDATA, FDATA, BREAK, CSCOEF [, …])
Specific: The specific interface names are S_CSAKM and D_CSAKM.
FORTRAN 77 Interface
Single: CALL CSAKM (NDATA, XDATA, FDATA, BREAK, CSCOEF)
Double: The double precision name is DCSAKM.
Description
The routine CSAKM computes a C1 cubic spline interpolant to a set of data points (xi, fi) for i = 1, …, NDATA = N. The breakpoints of the spline are the abscissas. Endpoint conditions are automatically determined by the program; see Akima (1970) or de Boor (1978).
If the data points arise from the values of a smooth (say C4) function f, i.e. fi = f(xi), then the error will behave in a predictable fashion. Let ξ be the breakpoint vector for the above spline interpolant. Then, the maximum absolute error satisfies
where
The routine CSAKM is based on a method by Akima (1970) to combat wiggles in the interpolant. The method is nonlinear; and although the interpolant is a piecewise cubic, cubic polynomials are not reproduced. (However, linear polynomials are reproduced.)
Comments
1. Workspace may be explicitly provided, if desired, by use of C2AKMD/C2AKM. The reference is:
CALL C2AKM (NDATA, XDATA, FDATA, BREAK, CSCOEF, IWK)
The additional argument is:
IWK — Work array of length NDATA.
2. The cubic spline can be evaluated using
CSVAL; its derivative can be evaluated using
CSDER.
3. Note that column NDATA of CSCOEF is used as workspace.
Example
In this example, a cubic spline interpolant to a function f is computed. The values of this spline are then compared with the exact function values.
USE CSAKM_INT
USE UMACH_INT
USE CSVAL_INT
IMPLICIT NONE
INTEGER NDATA
PARAMETER (NDATA=11)
!
INTEGER I, NINTV, NOUT
REAL BREAK(NDATA), CSCOEF(4,NDATA), F,&
FDATA(NDATA), FLOAT, SIN, X, XDATA(NDATA)
INTRINSIC FLOAT, SIN
! Define function
F(X) = SIN(15.0*X)
! Set up a grid
DO 10 I=1, NDATA
XDATA(I) = FLOAT(I-1)/FLOAT(NDATA-1)
FDATA(I) = F(XDATA(I))
10 CONTINUE
! Compute cubic spline interpolant
CALL CSAKM (XDATA, FDATA, BREAK, CSCOEF)
! Get output unit number
CALL UMACH (2, NOUT)
! Write heading
WRITE (NOUT,99999)
99999 FORMAT (13X, 'X', 9X, 'Interpolant', 5X, 'Error')
NINTV = NDATA - 1
! Print the interpolant on a finer grid
DO 20 I=1, 2*NDATA - 1
X = FLOAT(I-1)/FLOAT(2*NDATA-2)
WRITE (NOUT,'(2F15.3,F15.6)') X, CSVAL(X,BREAK,CSCOEF),&
F(X) - CSVAL(X,BREAK,&
CSCOEF)
20 CONTINUE
END
Output
X Interpolant Error
0.000 0.000 0.000000
0.050 0.818 -0.135988
0.100 0.997 0.000000
0.150 0.615 0.163487
0.200 0.141 0.000000
0.250 -0.478 -0.093376
0.300 -0.978 0.000000
0.350 -0.812 -0.046447
0.400 -0.279 0.000000
0.450 0.386 0.064491
0.500 0.938 0.000000
0.550 0.854 0.068274
0.600 0.412 0.000000
0.650 -0.276 -0.043288
0.700 -0.880 0.000000
0.750 -0.889 -0.078947
0.800 -0.537 0.000000
0.850 0.149 0.033757
0.900 0.804 0.000000
0.950 0.932 0.061260
1.000 0.650 0.000000
Published date: 03/19/2020
Last modified date: 03/19/2020
