JMSLTM Numerical Library 6.1

com.imsl.io
Class MPSReader

java.lang.Object
  extended by com.imsl.io.MPSReader
All Implemented Interfaces:
Serializable

public class MPSReader
extends Object
implements Serializable

Reads a linear programming problem from an MPS file.

An MPS file defines a linear or quadratic programming problem. Linear programming problems read using this class are assumed to be of the form:

mathop {min }limits_{x; in ;R^n } c^T x

subject to

b_l  le Ax  le b_u

,,x_l  le x le x_u

where c is the objective coefficient vector, A is the coefficient matrix, and the vectors b_l, b_u, x_l, and x_u are the lower and upper bounds on the constraints and the variables, respectively.

The following table helps map this notation into the use of MPSReader.

CObjective
AConstraint matrix
b_lLower Range
b_uUpper Range
x_lLower Bound
x_uUpper Bound

If the MPS file specifies an equality constraint or bound, the corresponding lower and upper values will be exactly equal.

The problem formulation assumes that the constraints and bounds are two-sided. If a particular constraint or bound has no lower limit, then the corresponding entry in the structure is set to negative machine infinity. If the upper limit is missing, then the corresponding entry in the structure is set to positive machine infinity.

MPS File Format

There is some variability in the MPS format. This section describes the MPS format accepted by this reader.

An MPS file consists of a number of sections. Each section begins with a name in column 1. With the exception of the NAME section, the rest of this line is ignored. Lines with a '*' or '$' in column 1 are considered comment lines and are ignored.

The body of each section consists of lines divided into fields, as follows:

Field Number ColumnsContent
12-3Indicator
25-12Name
315-22Name
425-36Value
540-47Name
650-61Value

The format limits MPS names to 8 characters and values to 12 characters. The names in fields 2, 3 and 5 are case sensitive. Leading and trailing blanks are ignored, but internal spaces are significant.

The sections in an MPS file are as follows:

NAME

ROWS

COLUMNS

RHS

RANGES (optional)

BOUNDS (optional)

QUADRATIC (optional)

ENDATA

Sections must occur in the above order.

MPS keywords, section names and indicator values, are case insensitive. Row, column and set names are case sensitive.

NAME Section

The NAME section contains the single line. A problem name can occur anywhere on the line after NAME and before columns 62. The problem name is truncated to 8 characters.

ROWS Section

The ROWS section defines the name and type for each row. Field 1 contains the row type and field 2 contains the row name. Row type values are not case sensitive. Row names are case sensitive. The following row types are allowed:

Row TypeMeaning
EEquality constraint
LLess than or equal constraint
GGreater than or equal constraint
NObjective of a free row

COLUMNS Section

The COLUMNS section defines the nonzero entries in the objective and the constraint matrix. The row names here must have been defined in the ROWS section.

FieldContents
2Column name
3Row name
4Value for the entry whose row and column are given by fields 2 and 3
5Row name
6Value for the entry whose row and column are given by fields 2 and 5

Note: Fields 5 and 6 are optional.

The COLUMNS section can also contain markers. These are indicated by the name 'MARKER' (with the quotes) in field 3 and the marker type in field 4 or 5.

Marker type 'INTORG' (with the quotes) begins an integer group. The marker type 'INTEND' (with the quotes) ends this group. The variables corresponding to the columns defined within this group are required to be integer.

RHS Section

The RHS section defines the right-hand side of the constraints. An MPS file can contain more than one RHS set, distinguished by the RHS set name. The row names here must be defined in the ROWS section.

FieldContents
2RHS name
3Row name
4Value for the entry whose row and column are given by fields 2 and 3
5Row name
6Value for the entry whose row and column are given by fields 2 and 5

Note: Fields 5 and 6 are optional.

RANGES Section

The optional RANGES section defines two-sided constraints. An MPS file can contain more than one range set, distinguished by the range set name. The row names here must have been defined in the ROWS section.

FieldContents
2Range set name
3Row name
4Value for the entry whose row and column are given by fields 2 and 3
5Row name
6Value for the entry whose row and column are given by fields 2 and 5

Note: Fields 5 and 6 are optional.

Ranges change one-sided constraints, defined in the RHS section, into two-sided constraints. The two-sided constraint for row i depends on the range value, r_i, defined in this section. The right-hand side value, b_i , is defined in the RHS section. The two-sided constraints for row i are given in the following table:

Row Type Lower ConstraintUpper Constraint
Gb_ib_i + |r_i|
Lb_i - |r_i|b_i
Eb_i + min(0, r_i)b_i + max(0, r_i)

BOUNDS Section

The optional BOUNDS section defines bounds on the variables. By default, the bounds are 0 le x_i le infty. The bounds can also be used to indicate that a variable must be an integer.

More than one bound can be set for a single variable. For example, to set 2 le x_i le 6 use a LO bound with value 2 to set 2 le x_i and an UP bound with value 6 to add the condition x_i le 6.

An MPS file can contain more than one bounds set, distinguished by the bound set name.

FieldContents
1Bounds type
2Bounds set name
3Column name
4Value for the entry whose set and column are given by fields 2 and 3
5Column name
6Value for the entry whose set and column are given by fields 2 and 5

Note: Fields 5 and 6 are optional.

The bound types are as follows. Here b_i are the bound values defined in this section, the x_i are the variables, and I is the set of integers.

Bound Type DefinintionFormula
LOLower boundb_i le x_i
UPUpper boundx_i le b_i
FXFixed Variablex_i = b_i
FRFree variable-infty le x_i le infty
MILower bound is minus infinity-infty le x_i
PLUpper bound is positive infinityx_i le infty
BVBinary variable (variable must be 0 or 1)x_i in {0,1}
UIUpper bound and integerx_i le b_i and x_i in I
LILower bound and integerb_i le x_i and x_i in I
SCSemicontinuous0 or b_i le x_i

The bound type names are not case sensitive.

If the bound type is UP or UI and b_i le x_i then the lower bound is set to -infty.

ENDATA Section

The ENDATA section ends the MPS file.

See Also:
Example, Serialized Form

Nested Class Summary
static class MPSReader.Element
          An element in the sparse contraint matrix.
static class MPSReader.InvalidMPSFileException
          The MPS file is invalid.
 class MPSReader.Row
          A row either in the constraint matrix or a free row.
 
Field Summary
static int BINARY_VARIABLE
          Variable must be either 0 or 1.
static int CONTINUOUS_VARIABLE
          Variable is a real number.
static int INTEGER_VARIABLE
          Variable must be an integer.
 
Constructor Summary
MPSReader()
           
 
Method Summary
 double getLowerBound(int iVariable)
          Returns the lower bound for a variable.
 double getLowerRange(int iRow)
          Returns the lower range value for a constraint equation.
 String getName()
          Returns the name of the MPS problem.
 String getNameBounds()
          Returns the name of the BOUNDS set.
 String getNameColumn(int iColumn)
          Returns the name of a constraint column.
 String getNameObjective()
          Returns the name of the free row containing the objective.
 String getNameRanges()
          Returns the name of the RANGES set.
 String getNameRHS()
          Returns the name of the RHS section.
 String getNameRow(int iRow)
          Returns the name of a contraint row.
 int getNumberOfBinaryConstraints()
          Returns the number of binary constraints.
 int getNumberOfColumns()
          Returns the number of columns in the constraint matrix.
 int getNumberOfIntegerConstraints()
          Returns the number of integer constraints.
 int getNumberOfNonZeros()
          Returns the number of nonzeros in the constraint matrix.
 int getNumberOfRows()
          Returns the number of rows in the constraint matrix.
 MPSReader.Row getObjective()
          Returns the objective as a Row.
 double[] getObjectiveCoefficients()
          Returns the coefficents of the objective row.
 MPSReader.Row getRow(int iRow)
          Returns a row of the constraint matrix or a free row.
 double[] getRowCoefficients(int iRow)
          Returns the coefficents of a row.
 int getTypeVariable(int iVariable)
          Returns the type of a variable.
 double getUpperBound(int iVariable)
          Returns the upper bound for a variable.
 double getUpperRange(int iRow)
          Returns the upper range value for a constraint equation.
protected  String processCommand(String command, String line)
          Process a section of the MPS file.
 void read(Reader reader)
          Reads and parses the MPS file.
 void setNameBounds(String nameBounds)
          Sets the name of the BOUNDS set to be used.
 void setNameObjective(String nameObjective)
          Sets the name of the free row containing the objective.
 void setNameRanges(String nameRanges)
          Sets the name of the RANGES set to be used.
 void setNameRHS(String nameRHS)
          Sets the name of the RHS set to be used.
 
Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait
 

Field Detail

BINARY_VARIABLE

public static final int BINARY_VARIABLE
Variable must be either 0 or 1.

See Also:
Constant Field Values

CONTINUOUS_VARIABLE

public static final int CONTINUOUS_VARIABLE
Variable is a real number.

See Also:
Constant Field Values

INTEGER_VARIABLE

public static final int INTEGER_VARIABLE
Variable must be an integer.

See Also:
Constant Field Values
Constructor Detail

MPSReader

public MPSReader()
Method Detail

getLowerBound

public double getLowerBound(int iVariable)
Returns the lower bound for a variable.

Parameters:
iVariable - is the number of the variable.

getLowerRange

public double getLowerRange(int iRow)
Returns the lower range value for a constraint equation.

Parameters:
iRow - is the row number of the equation.

getName

public String getName()
Returns the name of the MPS problem. This is the value of the NAME field.


getNameBounds

public String getNameBounds()
Returns the name of the BOUNDS set. An MPS file can contain multiple sets of BOUNDS, but only one is retained by this reader. Returns null if there is no BOUNDS set.


getNameColumn

public String getNameColumn(int iColumn)
                     throws MPSReader.InvalidMPSFileException
Returns the name of a constraint column. Constraint column names are also variable names.

Parameters:
iColumn - is the number of the column.
Throws:
MPSReader.InvalidMPSFileException

getNameObjective

public String getNameObjective()
Returns the name of the free row containing the objective.


getNameRanges

public String getNameRanges()
Returns the name of the RANGES set. An MPS file can contain multiple sets of RANGES, but only one is retained by this reader. Returns null if there is no RANGES set.


getNameRHS

public String getNameRHS()
Returns the name of the RHS section.


getNameRow

public String getNameRow(int iRow)
Returns the name of a contraint row.


getNumberOfBinaryConstraints

public int getNumberOfBinaryConstraints()
Returns the number of binary constraints. An binary constraint is the requirment that a variable be either 0 or 1. Binary constraints are also integer contraints.


getNumberOfColumns

public int getNumberOfColumns()
Returns the number of columns in the constraint matrix.


getNumberOfIntegerConstraints

public int getNumberOfIntegerConstraints()
Returns the number of integer constraints. An integer constraint is the requirment that a variable be an integer.


getNumberOfNonZeros

public int getNumberOfNonZeros()
Returns the number of nonzeros in the constraint matrix.


getNumberOfRows

public int getNumberOfRows()
Returns the number of rows in the constraint matrix.


getObjective

public MPSReader.Row getObjective()
Returns the objective as a Row.


getObjectiveCoefficients

public double[] getObjectiveCoefficients()
Returns the coefficents of the objective row.


getRow

public MPSReader.Row getRow(int iRow)
Returns a row of the constraint matrix or a free row.

Parameters:
iRow - is the number of the row.

getRowCoefficients

public double[] getRowCoefficients(int iRow)
Returns the coefficents of a row.

Parameters:
iRow - is the number of the row.

getTypeVariable

public int getTypeVariable(int iVariable)
Returns the type of a variable. The variable types are CONTINUOUS_VARIABLE, BINARY_VARIABLE or INTEGER_VARIABLE.

Parameters:
iVariable - is the number of the variable.

getUpperBound

public double getUpperBound(int iVariable)
Returns the upper bound for a variable.

Parameters:
iVariable - is the number of the variable.

getUpperRange

public double getUpperRange(int iRow)
Returns the upper range value for a constraint equation.

Parameters:
iRow - is the row number of the equation.

processCommand

protected String processCommand(String command,
                                String line)
                         throws IOException,
                                MPSReader.InvalidMPSFileException
Process a section of the MPS file.

Returns:
the next line to be processed. This line was read, but was not part of the section being processed.
Throws:
IOException
MPSReader.InvalidMPSFileException

read

public void read(Reader reader)
          throws IOException,
                 MPSReader.InvalidMPSFileException
Reads and parses the MPS file.

Throws:
IOException
MPSReader.InvalidMPSFileException

setNameBounds

public void setNameBounds(String nameBounds)
Sets the name of the BOUNDS set to be used. An MPS file can contain multiple sets of BOUNDS, but only one is retained by this reader. If not set name is set, then the first set in the file is used.


setNameObjective

public void setNameObjective(String nameObjective)
Sets the name of the free row containing the objective. An MPS file can contain free rows, but only one is retained by this reader as the objective. If not set name is set, then the first free row in the file is used as the objective.


setNameRanges

public void setNameRanges(String nameRanges)
Sets the name of the RANGES set to be used. An MPS file can contain multiple sets of RANGES, but only one is retained by this reader. If not set name is set, then the first set in the file is used.


setNameRHS

public void setNameRHS(String nameRHS)
Sets the name of the RHS set to be used. An MPS file can contain multiple sets of RHS values, but only one is retained by this reader. If not set name is set, then the first set in the file is used.


JMSLTM Numerical Library 6.1

Copyright © 1970-2010 Visual Numerics, Inc.
Built July 30 2010.